Home > Products > Straight Line (Jointer) Rip Saw
Designed For Lumber Straight Modifies Processing, Jointer Modifies Procecessing And Reconditioning
Features
|
Optional Equipments
Machine Equipment | Code | Name of the Item | Explanation |
---|---|---|---|
RS-16 equipment | A |
Press roller auto lifting seat | Install the auto lifting motor instead of manual adjusting. |
T |
Table width expand module | The left of the saw blade can be set the width of 800mm. | |
RS-16&
RSN-12 Equipment |
L |
Line laser rating | Equip the line laser rating will project the base line to assist the operating, decrease the lost of wood and raise the working efficiency. |
G |
Long material processing guide plate | Equip the long guide plate will decrease the Failure of processing while process the long wood. Length of plate: 0.9M - 2.4M. |
|
R |
Feeding guide plate assist side press roller | To assist the wood approach the plate when the wood is fed by operator. | |
C |
Process data recorder (micro computer) | The machine turn on time, process length and process hour can be accumulated and storage fro convenience of management. | |
D |
The saw pit door secure electric lock | The door can be opened only when the saw blade has completely stopped. | |
I |
The main arbor frequency conversion rpm and digital rpm display | Equip with the inverter, the main arbor speed can be adjusted from 2200-4200 rpm. Equip with the function of the main arbor break, the saw blade will stop within 10-15 sec. Depends on the size of the blade and the setting value after turning off the machine. | |
RSN-12 equipment | RSN-100 |
120mm short wood processing equipment | The upper press roller can be exchanged from 8 sets to 10 sets fro processing shortest wood, 120mm |
RSN-12
RSN-12B / RSN-12C Specification
Model | RSN-12B | RSN-12C |
---|---|---|
Diameter of saw | External diameter Ø255mm~Ø355mm(Ø10〞~Ø14〞), hole diameter 50.8mm(Ø2〞) |
|
Saw kerf | 3.2~5.0mm | |
Max. process thickness | 25mm(10〞), 50mm(12〞),75mm(14〞) | |
Max. process width | Left of saw blade 250mm, Right of saw blade 500mm | |
The shortest process length | 200mm | |
Revolution of saw arbor | 2850 rpm/50Hz, 3450rpm/60Hz | |
Feeding speed | 3 - 26 m/min | |
Saw Motor | 7 1/2 HP | 10 HP |
Feeding Motor | 1 HP | |
Table dimension | L1750 x W860 x H830mm | |
Machine dimension | L1950xW1280 xH1350mm | |
Machine weight | 950Kg | 960Kg |
RSN-100
RSN-100 Specification
Model | RSN-100C |
---|---|
Diameter of saw | External diameter Ø255mm~Ø355mm(Ø10〞~Ø14〞), hole diameter 50.8mm(Ø2〞) |
Saw kerf | 3.2~5.0mm |
Max. process thickness | 25mm(10〞), 50mm(12〞),75mm(14〞) |
Max. process width | Left of saw blade 250mm, Right of saw blade 500mm |
The shortest process length | 100mm |
Revolution of saw arbor | 2850 rpm/50Hz, 3450rpm/60Hz |
Feeding speed | 3 - 26 m/min |
Saw Motor | 10 HP |
Feeding Motor | 1 HP |
Table dimension | L1750 x W860 x H830mm |
Machine dimension | L1950xW1280 xH1350mm |
Machine weight | 960Kg |
RS-16
RS-16 / RS-16A / RS-16C Specification
Model | RS-16 | RS-16A | RS-16C |
---|---|---|---|
Diameter of saw | External diameter Ø305mm~Ø455mm(Ø12〞~Ø18〞), hole diameter 50.8mm(Ø2〞) |
||
Saw kerf | 3.2~5.0mm | ||
Max. process thickness | 45mm(12〞),70mm(14〞), 95mm(16〞), 120mm(18〞) | ||
Max. process width | Left of saw blade 300mm, Right of saw blade 640mm | ||
The shortest process length | 250mm | ||
Revolution of saw arbor | 2850 rpm/50Hz, 3450rpm/60Hz | ||
Feeding speed | 3 – 22 m/min | ||
Saw Motor | 10 HP | 15 HP | 20 HP |
Feeding Motor | 2 HP | ||
Table dimension | L2000 x W1020 x H850mm | ||
Machine dimension | L2250xW1500 xH1350mm | L2250xW1600 xH1350mm | |
Machine weight | 1750Kg | 1800Kg |
RS-21C
RS-21C Specification
Model | RS-21C |
---|---|
Diameter of saw | External diameter Ø355mm~Ø533mm(Ø14〞~Ø21〞), hole diameter 50.8mm(Ø2〞) |
Saw kerf | 3.2~5.0mm |
Max. process thickness | 70mm(14〞), 95mm(16〞), 120mm(18〞), 145mm(20〞), 157mm(21〞) |
Max. process width | Left of saw blade 300mm, Right of saw blade 640mm |
The shortest process length | 250mm |
Revolution of saw arbor | 2850 rpm/50Hz, 3450rpm/60Hz |
Feeding speed | 3 – 22 m/min |
Saw Motor | 20 HP |
Feeding Motor | 2 HP |
Table dimension | L2000 x W1020 x H850mm |
Machine dimension | L2250xW1600 xH1430mm |
Machine weight | 1980Kg |
RS-180
RS-180 Specification
Model | RS-180A |
---|---|
Diameter of saw | External diameter Ø305mm~Ø455mm(Ø12〞~Ø18〞), hole diameter 50.8mm(Ø2〞) |
Saw kerf | 3.2~5.0mm |
Max. process thickness | 45mm(12〞),70mm(14〞), 95mm(16〞), 120mm(18〞) |
Max. process width | Left of saw blade 300mm, Right of saw blade 640mm |
The shortest process length | 125mm |
Revolution of saw arbor | 2850 rpm/50Hz, 3450rpm/60Hz |
Feeding speed | 3 – 22 m/min |
Saw Motor | 20 HP |
Feeding Motor | 2 HP |
Table dimension | L2000 x W1020 x H850mm |
Machine dimension | L2250xW1600 xH1350mm |
Machine weight | 1800Kg |